Microprocessor Flame Photometer

Microprocessor Flame Photometer

Product Details:

X

Product Description

SALIENT FEATURES :

  • Calibration curve fit routines first order and second order
  • Data displayed in concentration units i.e. ppm & meq
  • Automatic filter selection
  • Auto calibration feature
  • Printer attachment
  • PC connecting compatibility
  • Sample data storage more than 500 results
  • Alphanumerical key board for easy data entry
  • Graphical LCD display thus easy to read
  • Curve calibration using up to 5 standard
  • Multiple calibration curve saving facility
  • Stainless steel burner
  • Auto Gas Cut off in case of power failure
  • Ca & Li Filters Extra on Request Only

 

PRODUCT DETAILS :

  • Microprocessor Flame Photometers LIM-204 are used for the determination of sodium, potassium, calcium and lithium. They use the latest microcontroller technology and advanced engineering techniques so as to give enhanced and reproducibility. They have soft touch membrane key for ease of operations.
  • The sample solution is aspirated through an atomizer. Sample, Air and the fuel are mixed in the mixing chamber which is then sprayed as a very fine mist into the flame. The color of the flame is changed depending upon the concentration of elements present. Radiations from the flame passes through the sensing system and specific narrow band interference filter which permits only the characteristic radiation to pass to the photo-detector. The output of the photo-detector is then processed by the microcontroller and the final results are displayed on the 20 x 4 line alphanumeric LCD with backlit.
  • In both models 5-Point calibration facility and non-linearity correction is provided through an automatic curve fitting software. Facility has been provided for re-standardization with a single standard, thereby, eliminating the need of the multiple standards once a calibration has been performed.

 

SPECIFICATIONS :

 

General

Serum

Urine

Range

Na : 0.1-100 ppm Up to  250 meq/l, 1:100 dil

 

K : 0.1-100 ppm Up to 250 meq/l, 1:100 dil

 

Ca : 15-100 ppm Up to 250 meq/l, 1:100 dil

 

Li : 0.5-100 ppm Up to 250 meq/l, 1:100 dil

 

Na : 0-200 1:100 dil

 

 

K : 0-10 1:100 dil

 

 

Ca : -  Li :  0-2 1:5 dil

Na : 0-250 1:100 dil

 

 

K : 0-100  1:100 dil

 

 

Ca : -  Li  :  0-10 1:2 dil

Sensitivity

General Mode : Na : 0.5ppm , K : 0.5ppm , Li : 0.5 ppm, Ca :15ppm

Filters

Na & K Supplied (Ca & Li optional at extra cost)

Resolution

0.1 ppm / meq

Reproducibility

2% FS & 2 Digits

Curve Fit Accuracy

  2 % FS

Display

20 x 4 Alphanumeric backlit LCD display

Average Time

In-built in Software

Flame System

LPG & dry oil free air

Detector

Silicon Photodiode

Calibration

Up to 5-Point Calibration with curve fitting software

Gas Control

Adjustable with knobs

Ignition System

Auto Ignition

Atomizer

Axial flow type

RS-232 Interface

Available (PC Software at extra cost)

Power

230 V, 10 % AC, 50 Hz

Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Flame Photometer' category



Our Clients

Send Inquiry Send SMS
trade india member
LABARD INSTRUCHEM PRIVATE LIMITED All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.